/dev/ttyUSBD0
/dev/ttyUSBD1
/dev/ttyUSBD2
/dev/ttyUSBD3
Use these settings to make sure the same port is always talking to the same device.
This is the file that creates these settings in the lumberjack
/etc/udev/rules.d/99-usb-serial.rules
KERNEL=="ttyUSB*", KERNELS=="1-1.2", SYMLINK+="ttyUSBD0"
KERNEL=="ttyUSB*", KERNELS=="1-1.3", SYMLINK+="ttyUSBD1"
KERNEL=="ttyUSB*", KERNELS=="1-1.4", SYMLINK+="ttyUSBD2"
KERNEL=="ttyUSB*", KERNELS=="1-1.5", SYMLINK+="ttyUSBD3"
Comments
0 comments
Article is closed for comments.